/**************************************************************************//**
 * @file     main.c
 * @version  V1.00
 * $Revision: 4 $
 * $Date: 14/09/11 5:23p $
 * @brief    Show how to pixel on and off on LCD panel.
 *
 * @note
 * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
#include "Nano100Series.h"
#include "adc.h"
#include "gpio.h"
#include "pwm.h"
#include "timer.h"
#include "uart.h"
#include "sys.h"
#include "clk.h"
#include "EEPROM_Emulate.h"


#include "My_define.h"

#define __wdt_setting()	 SYS_UnlockReg(); WDT_Open(WDT_TIMEOUT_2POW14, 0, TRUE, FALSE); SYS_LockReg();
#define __wdt_reset()		SYS_UnlockReg(); WDT_RESET_COUNTER(); SYS_LockReg();


extern volatile uint16_t Process_1000ms , Process_333ms, Process_100ms, Process_10ms, Process_5ms;
extern volatile uint8_t Err_Code;



extern volatile uint8_t Tx_Mode_Event, Tx_Fan_Event, Tx_Reserve_Event;
extern volatile uint8_t Reserve_hour;

extern volatile uint8_t Roomcon_connect_mode;

uint32_t Reset_src_value = 0;

// HERV~~~MAIN
void main(void)
{
/*
	 // === 부팅 검증 코드 — 다른 모든 init 보다 먼저 ===
	    {
	        // 1. SYS 보호 레지스터 unlock — BSP 함수 사용
	        SYS_UnlockReg();

	        // 2. GPIO AHB 클럭 강제 활성화 (Nano100: CLK->AHBCLK bit 0 = GPIO_EN)
	        CLK->AHBCLK |= CLK_AHBCLK_GPIO_EN_Msk;

	        // 3. PA10 을 push-pull OUTPUT 으로 강제 설정 (PMD[21:20] = 01)
	        PA->PMD &= ~(0x3UL << 20);
	        PA->PMD |=  (0x1UL << 20);

	        // 4. LED 무조건 토글 — 이게 깜박이면 부팅 자체는 정상
	        while(1) {
	            PA->DOUT ^= (1UL << 10);
	            for(volatile uint32_t i = 0; i < 200000; i++);
	        }
	    }
*/

    uint8_t Indicate_Error = 0;



__disable_irq();   // NuEclipse(GCC) 포팅: __disable_interrupt() → __disable_irq() (CMSIS 표준)

    SYS_Init();
	
	SYS_EnableBOD(SYS_BODCTL_BOD25_RST_EN_Msk, SYS_BODCTL_BOD25_EN_Msk);


	ADC_Init();

	GPIO_Init();
	PWM_Init();
	Timer0_Init();
	Timer1_Init();
	
    UART0_Init(); // INT1 Hood
    UART1_Init(); // to EX1 - homnet
    SC0_Init();   // to RJ roomcon
    SC1_Init();   // to EX2 --> BUNBAGI
    
	Init_EEPROM(eep_data_size, eep_page_amount);
	Search_Valid_Page();
	
__enable_irq();    // NuEclipse(GCC) 포팅: __enable_interrupt() → __enable_irq() (CMSIS 표준)

	Reset_src_value = SYS_GetResetSrc();
	init_process();
	SYS_ClearResetSrc(Reset_src_value);

	__wdt_setting();

    while(1)
    {
		Hood_RS485_process(); // Hood connect - uart0
		//com_display_process(); // display
		com_roomcon_process(); // roomcon
    	InCom_process();        // Bunbaegi
        Homenet_Process();      // HOMENET(ErvDashboard) 수신 명령 처리 + REQ_STATUS 응답

		if(Process_5ms == 0)
		{
			Process_5ms = 5;
		}
		
		if(Process_10ms == 0)
		{
			Process_10ms = 3000;
		}

		if(Process_100ms == 0)
		{
			Process_100ms = 100;
			Fan_Speed_process();
			Fan_Error_Check();
			Tx_display_flag = 1;
		}
		if(Process_333ms == 0)
		{
			Process_333ms = 200;
            Hood_process();
			__wdt_reset();
		}

		Indicate_Error = Err_Code;
		Indicate_Error &= ~(ERROR_SOMETIME|ERROR_PROTECT|ERROR_FILTER_CHANGE|ERROR_FILTER_CLEAN|ERROR_SOJA_CHANGE);
  
		if((Indicate_Error))
		{
			if(Process_1000ms < 600)ST_LED = 0;
			else ST_LED = 1;
		}
		else
		{
			if(Process_1000ms < 2)ST_LED = 0;
			else ST_LED = 1;
		}

		
 		if(Process_1000ms == 0)
		{
			Process_1000ms = 999;

			/* (꺼짐)예약 카운트다운 : 0 도달 시 전원 OFF (대시보드 CTRL_RESERVE) */
			if(Reserve_Remain_Sec > 0)
			{
				Reserve_Remain_Sec--;
				if(Reserve_Remain_Sec == 0)
				{
					Power_On = 0;
					Set_Run_Mode = 0;
					Set_Fan_Mode = 0;
					Command_request_type |= (TYPE_MODE | TYPE_FAN_SPEED);
				}
			}

			Bldc_check();
			ADC_Sensing();
            
			Filter_process();
            
            Air_Quality_color_process();
            Total_Air_Volume = Air_Quality_damper_process();  // 260520 사양 자동 동작로직(집중/분산) - 1s 주기
            Homenet_Send_Status();  // HOMENET(ErvDashboard) STATUS(0x81) 1s 주기 송신
			
			RJ_Com_Err_Check();
#if((SPEC_MODE_INFO&0x20) == 0x20) // UV 옵션
 			UV_process(); // 1sec
#endif
            
		}
		
		if(EEP_Save_Flag == 1)
		{
			EEP_Save_Flag = 0;
			EEP_Save_process();
		}
    }
}